A Review of Fluid Movement in Compacted Clay: The Case of Macropore Flow
In constructing natural hydraulic barriers to infiltration, a typical design is one founded on the use of layers of compacted clay. Unfortunately, in analyzing the hydraulic performance...

Testing Outlet Works Gates and Valves at USBR Dams Under Unbalanced-Head Conditions: Tieton Dam Unbalanced-Head Gate Test
The Tieton Dam outlet works installation geometry is the most common type used in U.S. Bureau of Reclamation (USBR) earthfill dams. An emergency guard gate is located in a gate chamber...

Testing Outlet Works Gates and Valves at USBR Dams Under Unbalanced Head Conditions: Close-coupled Guard and Regulating Gates at Yellowtail and Flaming Gorge Dam
Part of the U.S. Bureau of Reclamation (USBR) program for unbalanced testing of outlet works guard gates and valves at its dams involves testing facilities with 'close-coupled' guard and...

Updating Chapter II?Sediment Transportation Mechanics
Chapter II, the most comprehensive chapter of the Sedimentation Engineering Manual, has aged. The manual prepared by the Task Committee for the Manual on Sedimentation was published by...

Fluid Mechanics Aspects of Ocean Outfalls
Prediction of the environmental effects of ocean outfalls requires understanding of some complex fluid mechanical phenomena. These include the dynamics of merging plumes in flowing, density-stratified...

Hydraulic Modeling of Fish Screens
Hydraulic model studies coupled with available knowledge of fish behavior can be important component in the development of fish-screening systems. To reproduce in a model the flow field...

Hydraulic Model Studies of Y-Branch
Hydraulic model studies were made for the Y-branch steel penstock located in a vertical bend. The model tests were performed for various modes of pumping and generating operation. The...

Serviceability Stress Limits for Composite Beams
Serviceability limits are increasingly becoming the critical design requirement for composite beams. A set of three illustrative design studies indicates that this is particularly true...

Design of Shear Connectors in Composite Bridge Beams
A new approach is described for the design of stud shear connectors, in composite steel and concrete beams that are subjected to vehicular loads, which allows for the interaction between...

SHRP Deformation Test?Asphalt Mix Tests and Analysis Systems
From analyses of existing information on the permanent-deformation characteristics of asphalt/binder-aggregate mixes, as well as the development of permanent deformation in pavement structures,...

Radiographic Visualization in Experimental Soil Mechanics
A summary of the principles of such methods is presented, i.e. stereophotogrammetry, infrared thermography and radiography and their respective ranges of applicability are discussed. Then,...

Digital Image Techniques for Volume Change Measurements in Triaxial Tests
This paper presents an innovative technique that has been used for measuring the volumetric deformation that cylindrical specimens experience during the shearing stages of a triaxial test....

Displacements in the Soil Near a Tunnel Face Using Centrifuge Tests and Image Processing
Image processing is applied to measurements of the soil for a tunnel model in centrifuge. For this aim a specifical device has been developed on the LCPC centrifuge (Nantes, France) and...

Resin Modified Pavement in Airfield Applications
The resin modified pavement (RMP) is a composite paving material that combines the flexible characteristics of an asphalt concrete (AC) material with the durability of a portland cement...

Heavy Aircraft Damage to Rigid Airport Pavements
A theoretical solution is presented for the damage caused by heavy aircraft at the transverse joints in a rigid airport pavement. Large stresses in the subgrade generate significant permanent...

Verification of Deep Foundations by NDT Methods
Deep foundations are designed using static analysis techniques and the soil strength and structural integrity are then confirmed by static load tests. However, static tests are time consuming...

Negative Skin Friction Due to Wetting of Unsaturated Soil
A steel building at a cement plant un Utah was originally supported by spread footings. Shallow wetting of the coarse granular soils supporting the footings resulted in over three inches...

Osmotic Suction as a Valid Stress State Variable in Unsaturated Soil Mechanics
The hypothesis of the research being presented is that the osmotic suction of soil pore fluid is an independent, valid stress sate variable for unsaturated soils. A review of concepts...

The Transistor Psychrometer: A New Instrument for Measuring Soil Suction
The transistor psychrometer is the latest instrument available for the measurement of soil moisture suction. It has been developed over a number of years and is very similar in operation...

Performance of Horizontal and Vertical Barriers
Horizontal and vertical barriers have been used on transportation facilities to control expansive soils and minimize their damages. The effort is to minimize moisture change in the soil...

 

 

 

 

Return to search